Finite Element Analysis (FEA)

FEA Modeling and Simulation
Applied Technical Services (ATS) is a consulting engineering firm with extensive testing, inspection, and analysis capabilities. ATS licensed Professional Engineers utilize finite element analysis to simulate structural, vibration, and thermal response which provide predictions of how your systems will perform. Results of finite element analysis can be evaluated and compared to codes, standards or customer specifications.
Delivering Results
ATS' licensed Professional Engineers develop static or transient, linear or nonlinear finite element models to evaluate structural and thermal responses. These finite element analyses produce detailed time or frequency histories, graphs and contour plots of stress, structural, and thermal loads, and deformation under various loads or service conditions.
When Quality is Non-negotiable
Our engineers are committed to quality. A finite element analysis is only as good as the accuracy of the geometry, boundary conditions, load characterization, and material properties assigned. Our analysts' design experience produce advanced 3D CAD and FEA models with properly integrated meshes for precise structural and thermal representations. Our validity checks include convergence analysis, review of constraints, loads, and when needed, additional codes or analytical solutions to provide confidence in our results.
Backed by In-house Testing and Failure Analysis Experts
Finite element representations of critical system components can be validated with in-house testing and failure analysis capabilities. If geometry data is unavailable, ATS can reverse engineer components using the latest scanning technology for precise measurements, and through chemical and mechanical testing determine material composition, mechanical properties, and material defects.
FEA Capabilities:
- Suspension and Fall Arrest Anchorage Systems
- Tank, Vessel and Piping Systems "Fit for Service"
- ASME Sec. VIII, Division 2 Analysis
- Structural / Thermal Coupling
- Shock / Explosive / Impact Loading
- Modal / Frequency Response Analysis
- Non-linear / Time Response Analysis
- Fatigue and Buckling
- Materials Selection / Characterization
- Design and Structural Optimization
- Product Development, Validation Testing and Failure Analysis
- Conduct physical testing (tensile strength, material composition, etc.) for FEA use
Similar Services
- Commercial Engineering Services
- Engineering Consulting Services
- Exposed Structures
- General Engineering Services
- Engineer Firm
- Industrial Engineering Companies
- Industrial Services
- Mechanical Integrity Program
- Safety Engineering Services
- Scaffold Inspections
- Storm Structural Evaluations Engineering
- Structural Engineering Company
- Structural Engineering
- Weld Engineering Companies
- Above Ground Tanks
- API 510
- API 570
- API 653
- Boiler Inspections Company
- Boiler Inspections
- In Service Tank Inspections
- Tank Inspections
- Tank Inspection Company
- Boiler
- Pressure Vessel Inspections
- Pipe Camera Inspections
- Pipe
- Piping Failure Analysis
- Pipe Testing
- Pipeline Inspections Company
- NFPA 25 Fire Water Storage Tank Inspections
- NFPA 25 Inspection Requirements
- ROV Tank Inspections
- Underwater ROV Inspections
- Drone Roof Inspection
- Drone/UAV Bridge Inspections
- Industrial Drone Inspections
- Drone Pipeline Inspections
- Drone Inspection Companies
- Drone Inspection
- UAV Inspections
- Davit Systems Inspections
- Facade Access Consultants
- Fall Protection Certifications
- Fall Protection Companies
- Fall Protection Consultants
- Fall Protection Inspections
- Fall Protection Services
- Fall Protection Systems
- Fall Protection
- OSHA Fall Protection Certification
- OSHA Tie Off Requirements
- Roof Anchor Installation
- Roof Anchor Inspection
- Roof Anchor
- Roof Davit Systems
- Roof Tie Off
- Tie Back Anchors
- Tie Back Inspections